CONTAINERS WITH CAP

In polyethylene, flat bottom with pressure cap attached to the container. Particularly suitable for the collection and the forwarding of any type of samples. Can be used as weighing containers.

ART. VOL. ML H. MM
10601 1 32
10611 2.5 31.5
10602 5 49
10603 7 32.9
10613 8 57.6
10623 20 74.5
10604 25 52.5
10605 35 74.5

 

  CONTAINERS WITH SCREW CAP

In polyethylene, high thickness, with screw cap perfectly tight in order to avoid leakages. They show an excellent chemical resistance.

ART. VOL. ML H. MM
10631 5 30
10632 30 53
10633 90 62

 

  WEIGHING BOTTLES

In polypropylene, semi-transparent and rigid, air-proof lid. Good resistance to acids, they are autoclavable.

ART. VOL. ML H. MM
10661 30 50
10662 50 30
10663 70 70
10664 400 120

 

  DECANTING FUNNELS

In high density polyethylene, for general purposes. Upstand on rim to reduce possible overflow. Hanging eye for easy storage.

ART. VOL. ML STEM Ø MM
10691 100 13
10692 300 14.7
10693 450 20
10694 750 24
10695 1500 30
10696 2750 35
10697 4000 38
10698 5500 43
10699 10000 57

 

  POWDER FUNNELS

In polypropylene, autoclavable, suitable to transfer powders or big volumes of liquid. Excellent chemical resistance.

ART. VOL. ML STEM Ø MM
10791 45 15
10792 94 15
10793 200 25
10794 360 30
10795 730 36
10796 1290 43

 

  ANALYTICAL FUNNELS

In polypropylene, autoclavable. Ideal for any laboratory utilization purpose. Dimensions of each funnel correspond to standard dimensions of filter paper.

ART. VOL. ML STEM Ø MM
10771 3.5 4
10772 10 5
10773 20 5
10774 50 10
10775 100 11
10776 200 11
10777 350 11
10778 700 14
10779 1250 14

 

  FUNNEL HOLDER

In polypropylene, single or double, for funnels from 25 up to 170 mm (with adapter). Without adapter, it can be used on funnels with stam Ø 35 mm max. Can be mounted on shafts Ø 8 ÷14 mm.

ART. PLACES FUNNEL Ø MM
10801 1 25 - 170
10802 2 25 - 170

 

  EXTENSIBLE SUPPORT

Rectangular bases in polypropylene with chromium plated steel rod. Rods, length 250 mm and Ø 12 mm, are sectional and can be screwed one over the other in order to obtain major length. Bases can be utilized with funnel holder code 10801 and 10802. Each base is supplied with n.2 rods.

ART. DESCRIPTION
10780 Base with centre hole supplied with 2 rods
10880 Base with off-centre hole supplied with 2 rods
10890 Spare rod 250 mm long - Ø 12 mm

 

  LABORATORY SPATULAS

In high impact polystyrene. Available in red and green colour.

ART. DESCRIPTION LENGTH MM
10831 spatula-spatula 150
10832 spatula-spatula 180
10833 spatula-spoon 180
10834 spatula-spoon 210

 

  BALLOONS SUPPORT

In polypropylene, minimum clutter, useful for round bottom balloons, they can bear temperatures up to 120°C. Available in white and red colour.

ART.
10811
10812

 

  DEEP TRAYS

In PVC, stackable.

ART. DIM. MM H. MM
10721 200x150 45
10722 250x200 60
10723 320x260 70
10724 350x300 80
10725 430x330 90
10726 520x420 90
10727 675x530 100
10728 540x420 180

 

  STACKABLE TANKS

In high density polyethylene. High resistance to organic and inorganic acids.

ART. DIM. MM H. MM VOL. LT
10753 415x315 200 20
10754 595x365 255 46
10755 695x438 306 72
10756 585x500 445 100

 

  STACKABLE TANKS LOW SHAPE

In high density polyethylene. High resistance to organic and inorganic acids.

ART. DIM. MM H. MM VOL. LT
10751 415 x 310 97 10
  ROUND BOWLS

White bowls with rim, in polypropylene. Sturdy structure with two grips in the lower part of the rim to help carriage. Autoclavable.

ART. DIM. MM VOL. LT
10720 Ø 350x160 10
  INPUT TRAYS

In PVC, they are very useful in the laboratory for storing small objects comfortably. Central compartment of five cavities tray can be used as well for serological pipettes.

ART. DIM. MM CAVITIES
10730 304 x 404 x 64 5
10740 304 x 404 x 64 12

 

  TRAYS AND TANKS

In high impact polystyrene. Suitable for food and general laboratory purposes.

ART. DIM. MM H. MM
10781 200x150 20
10782 350x250 20
10783 400x300 20
10784 200x150 40
10785 350x250 40
10786 400x300 40
10787 200x150 80
10788 350x250 80
10789 400x300 80

 

  MEASURING SCOOPS

In polypropylene, suitable for sampling.

ART. VOL. ML DIM. MM
10741 10 32x103x16
10742 25 44x137x21
10743 50 55x164x26
10744 100 67x201x34
10745 250 94x261x43
10746 500 112x315x55
10747 1000 141x386x69

 

  ROUND SHAPE SCOOPS

In polypropylene, suitable for heavy industrial sampling. Suitable for foodstuff.

ART. LENGTH MM VOL. ML
10748 250 250
10749 300 500
10750 350 1000
10759 400 1500

 

  72 PLACES DRAINING RACK

In high impact polystyrene. Made of support plate of 4 mm of thickness, with 72 closed sockets to avoid leakages by the side of the wall and, therefore, any contamination risk. It is supplied with 72 pegs, to be inserted by pressing them, for tools with spread of more than15 mm. It does not rust or scale and is supplied with users instructions and hooks. For objects having a smaller diameter, such as test tubes and similar, special small pegs code 13810 are also available.

ART. DIM. MM
13800 450x630x110

 

  DRAINING RACK ACCESSORY

Special small pags for objects having a smaller diameter, such as test tubes and similar. Bags of 11 pieces.

ART. DIM. MM
13810 Ø 6x95

 

  PVC LABORATORY HOSES

Flexible and trasparent hoses, manifactured in atoxic PVC. Suitable for liquids transfer. Cadmium free. Working temperature -5 °C/ +50 °C.

ART. INT. DIM. MM EXT. DIM. MM PACKAGE MT
10101 Ø 3 Ø 5 20
10102 Ø 4 Ø 6 20
10103 Ø 5 Ø 8 20
10104 Ø 6 Ø 9 20
10105 Ø 8 Ø 12 20
10106 Ø 10 Ø 14 20
10107 Ø 12 Ø 17 20

 

  NEOPRENE LABORATORY HOSES

Neoprene black hoses. For current laboratory purpose. Resistant to acids and solvents, except benzol and similar. Working temperature -35 °C/ +85 °C.

ART. INT. DIM. MM EXT. DIM. MM PACKAGE MT
10201 Ø 4 Ø 6 20
10202 Ø 6 Ø 9 20
10203 Ø 8 Ø 12 10
10204 Ø 10 Ø 14 10

 

  'Y'' AND 4 WAY CONNECTORS

In polypropylene. Autoclavable. With serrations to hold hoses tightly. Excellent chemical resistance.

ART. SHAPE FITS TUBING Ø MM
12201 T 4
12202 T 6
12203 T 8
12204 T 10
12241 L 4
12242 L 6
12243 L 8
12244 L 10

 

  'Y'' AND 4 WAY CONNECTORS

In polypropylene. Autoclavable. With serrations to hold hoses tightly. Excellent chemical resistance.

ART. SHAPE FITS TUBING Ø MM
12231 Y 4
12233 Y 8
12234 Y 10
12236 Y 14
12251 + 4
12253 + 8
12254 + 10
12256 + 14

 

  ICE BUCKET

In durable, rigid and unbreakable polyurethane skinned-foam (PUR), red colour, it has excellent insulating properties and is suitable for use with liquid nitrogen, dry-ice and water-ice. Provided with flush lid and integral handles for a proper stacking, it is ideal to keep samples at low temperatures. Autoclavable.

ART. DIM. MM VOL. LT
10711 Ø 270x200 4.5

 

  SAFETY SHIELDS

In transparent PMMA, available in two different thickness and dimensions. Extremely steady, they are supplied with anti-glide feet. Code 10905 is suitable to protect lab operators from dangerous chemical substance, aerosol and accidental sprinkling. Code 10909 has been particularly studied to assure an adequate shield when using beta-irradiant isotopes, including P32.

ART. DIM. MM THICKNESS MM
10905 242x365 5
10909 305x480 9

 

  MAGNETIC STIRRING BARS

Cylindrical magnetic stirring bars, round shape, smooth surface with Teflon® (PTFE) coating. Fitted by high magnetic force and long life. Maximum operating temperature +270°C.

ART. LENGHT (MM)
12721 6
12722 8
12723 11.68
12724 14.8
12725 19.6
12726 24.61
12727 29.88
12728 34.42
12729 40
12730 44.42
12732 49.90
12734 60.16
12736 69.65

 

  RETRIEVER STIRRING BAR

Suitable for removal of magnetic stirring bars. In polypropylene.

ART. DIM. MM
12700 Ø 10 x 300
  TIMERS

"Clip" and "Onehand" models have mechanical movement, with timing up to 60 min. "Electronic" model is battery operated, has a 4-digit display up to 19 hours 59 minutes, an electronic alarm and a free-standing clip and magnetic support. Material: ABS case.

ART. MOD. DIM. MM COLOUR
10851 Clip 56.5x56.5x28 White
10852 Onehand Ø 72.5x29.5 White-red
10853 Electronic 50x62x23 White

 

  PARAFILM® ROLLS AND CUTTER

Sealing film for laboratory containers. Suitable for any container, it has stretching power of 200% and can adhere on angles or irregular surface. The cutter is planned to safety store and cut Parafilm® sealing film. It can accomodate rolls of 50 and 100 mm widh.

ART. DESCRIPTION DIM. (MM X M)
10901 Parafilm® roll 100x38
10902 Parafilm® roll 50x75
10950 Parafilm® cutter -

 

  ABSORBENT BENCH PAPER, PLASTICIZED

This filter paper, plasticized with polyethylene film, was created to protect tops, laboratory benches and any other kind of surface. It is composed by two sides: one with absorbing paper and opposite with a polyethylene film which guarantees perfect waterproof. Weight: 144 gr/m2 - Thickness: 0.290 mm.

ART. DIM. CM
16600 48 x 60

 

  ZERO DNA

Zero DNA is a cleaning solution studied to be used in PCR (Polymerase Chain Reaction) working stations. It is a ready-for-use solution, highly active against RNA and DNA contamination on surfaces, lab equipment and pipettes.

ART. VOL. ML SUPPLIED
10250 250 Plastic bottle with spray
10500 500 Plastic bottle-refill

 

  ROUND PIPETTES STAND

In polypropylene, with rotating support to host 94 pipettes.

ART. H. MM
3300 470
  CYLINDER FOR PIPETTES

In polypropylene, with polyethylene lid. Particularly suitable for keeping clean pipettes apart from the contact with air. Can be used to put pipettes in autoclave (PE lid to be removed).

ART. H. MM
3400 426

 

  DEEP TRAY FOR PIPETTES

In PVC, for pipettes of different dimensions. Can accomodate 7 pipettes (Ø not more than 20 mm) lengthwise and 16 pipettes (Ø not more than 10 mm) sideways.

ART. DIM. MM H. MM
3500 216x283 40

 

 

PIPETTE - TRAY FOR DRAWER

In PVC. It can contain around 30 pipettes. Divided in 4 sectors for 1, 2, 5 and 10 ml pipettes

ART. DIM. MM H. MM
3600 300x426 30
  VERTICAL PIPETTES HOLDER

In polypropylene, with 3 levels, it can contain 16 pipettes(n. 8 pipettes max Ø10 mm + n. 8 pipettes max Ø15 mm). Its base is provided with small draining holes.

ART. DIM. MM H. MM
3700 200x75 150

 

  AUTOMATIC PIPETTES RINSING SET

In polypropylene, ideal for glass serological pipettes washing in a fast and safe method, as well in Laboratories where radioactive, caustic and toxic materials are in use. The soft polyethylene bottom removes the risk of pipettes breakage. It is provided by water drainer and it is used by pipette baskets. It can be used with pipette jars with several baskets, in order to effect the soak of more glassware groups by using the same detergent solution.

ART. DESCRIPTION H. MM
3900 Automatic pipette washer 734

 

 

AUTOMATIC PIPETTES ACCESSORIES

ART. DESCRIPTION H. MM
3905 Pipette jar 350
3910 Pipette basket 648

 

  BENCH PIPETTES HOLDER

Bench pipette holder, in PMMA. The perfect transparency allows to seen its content from any angle. Complete with four slightly inclined shelves which allow to accomodate serological pipettes in plastic or glass of different capacities.

ART. SHELVES DIM. MM
3950 4 300 x 100 x 420

 

  GRADUATED BEAKERS LOW FORM IN PP

In polypropylene, with a relief graduation in ml and oz. Suitable for all current laboratory purpose. Autoclavable up to +121 °C, continuous work at +100 °C. Excellent chemical resistance. In accordance with ISO 7056-1981 (E) and BS 5404 part 1.

ART. VOL. ML O.D.Ø MM H. MM
12032 25 34 49
12033 50 41 60
12034 100 51 72
12035 250 71 95
12036 500 87 119
12037 1000 109 147
12038 2000 132 183.5
12039 3000 158 201
12040 5000 188.5 229

 

  GRADUATED BEAKERS LOW FORM, IN TPX

In TPX®, with a relief graduation in ml and oz. Suitable for all current laboratory purpose. Autoclavable up to +121 °C, at +170 °C for short periods. Excellent chemical resistance. In accordance with ISO 7056-1981 (E) and BS 5404 part 1.

ART. VOL. ML O.D.Ø MM H. MM
12062 25 34 49
12063 50 42 60
12064 100 52 72
12065 250 71 95
12066 500 88 119
12067 1000 110 146
12068 2000 133 184
12069 3000 159 200
12070 5000 190 228

 

  HIGH AND GRADUATED JUGS

In polypropylene, autoclavable. Transparent, with indelible graduation and drop-saver spout.

ART. VOL. ML H. MM
12161 250 119
12162 500 140
12163 1000 169
12164 2000 213
12165 3000 240

 

  LOW AND GRADUATED JUGS

In polypropylene, autoclavable. Transparent, with indelible graduation and drop-saver mouth.

 
ART. VOL. ML H. MM
12171 500 116
12172 1000 131
12173 2000 165
12174 3000 180
12175 5000 225


CONICAL JUGS, WITH OPEN HANDLE

In transparent polypropylene, autoclavable. Stackable, with printed blue graduation scale.

ART. VOL. ML GRAD. ML H. MM
12191 250 5 115
12192 500 10 140
12193 1000 10 167
12194 2000 20 212
12195 3000 50 242

 

GRADUATED JUGS

Provided with drop-saver spout and handle for easy grip.

ART. Raw meterial Ø mm. VOL. LT H. MM
12091

HDPE

110

1 135
12092

PP

140

2 170
12093

PP

160

3 195
12094

PP

190

5 220

 

CONICAL ERLENMEYER FLASKS

In polypropylene, autoclavable. For general laboratory purposes, graduated, with standardized neck.

ART. VOL. ML NECK NS
12111 50 14/23
12112 125 14/23
12113 250 19/26
12114 500 24/29
12115 1000 29/32
12116 2000 34/35

 

  CONICAL MEASURES, GRADUATED

In polypropylene, with ml graduation and wide base to grant the maximum stability. Autoclavable, they withstand temperatures up to 121° C.

ART. VOL. ML GRAD. ML H. MM
12081 100 2 118
12082 250 5 164
12083 500 10 183
12084 1000 20 263

 

VOLUMETRIC FLASKS WITH SCREW CAP IN PP

In translucent polypropylene. Calibrated gravimetrically at 20°C to Class B standards. Autoclavable, they are supplied with stopper.

ART. VOL. ML H. MM O.D. Ø MM DIN STD.
12301 25 121 36 GL 18
12302 50 143 46 GL 18
12303 100 174 58 GL 18
12304 250 225 82 GL 25
12305 500 265 100 GL 25
12306 1000 325 120 GL 25

 

VOLUMETRIC FLASKS WITH SCREW CAP IN TPX®

In perfectly transparent TPX®. Calibrated gravimetrically at 20°C to Class B standards. Autoclavable, they are supplied with stopper.

ART. VOL. ML H. MM O.D. Ø MM
12311 50 143 46
12312 100 174 58
12313 250 225 82
12314 500 265 100
12315 1000 325 120

 

OPAQUE VOLUMETRIC FLASKS WITH SCREW CAP, IN TPX®

In opaque TPX® UV-absorbent for storage of light-sensitive substances. With coloured screw cap in PP. Class A flasks according to DIN EN ISO 1042 Norm. On each flask lot number and conformity are printed. Autoclavable up to +121°C.

ART. VOL. ML H. MM DIN STD.
12321 10 90 GL 18
12322 25 115 GL 18
12323 50 150 GL 18
12324 100 180 GL 18
12325 250 235 GL 25
12326 500 270 GL 25
12327 1000 310 GL 32

 

  CONICAL STOPPERS

Conical stoppers with pentagonal head. Manufactured to DIN standards 12242 ensuring sealing action on no-standard surfaces. Particularly suitable to use with flasks. In polypropylene.

ART. NS CONE COLOUR Ø LOWER (MM)
12510 7/16 Violet 5.9
12511 10/19 Light blue 8.1
12512 12/21 Green 10.4
12513 14/23 Brown 12.2
12514 19/26 Yellow 16.4
12515 24/29 Red 21.1
12516 29/32 Black 25.8
12517 34/35 White 30.9

 

  HIGH AND GRADUATED CYLINDERS IN PP

In polypropylene. They have an excellent chemical resistance. Autoclavable up to +121 °C, continuous work at +100 °C. Conform to ISO 6706-1981 (E) and BS 5404 part 2 1977 standards. Class B cylinders.

ART. VOL. ML O.D. Ø MM H. MM
12121 10 13.5 140
12122 25 18 195
12123 50 25.5 199
12124 100 30.5 249
12125 250 41.5 315
12126 500 55 361
12127 1000 66 439
12128 2000 84 531

 

  HIGH AND GRADUATED CYLINDERS IN TPX®

In TPX®, transparent. They have an excellent chemical resistance. Autoclavable up to +121 °C, they can be used for liquids up to +170 °C. Conform to ISO 6706-1981 (E) and BS 5404 part 2 1977 standards. Class B cylinders.

ART. VOL. ML O.D. Ø MM H. MM
12151 10 13.5 139
12152 25 18.5 195
12153 50 26 199
12154 100 31 249
12155 250 41.5 315
12156 500 55 361
12157 1000 66 438
12158 2000 84 531

 

  LOW AND GRADUATED CYLINDERS IN PP

In polypropylene, low form.They have an excellent chemical resistance. Autoclavable, they can bear temperatures up to 121°C.

ART. VOL. ML H. MM
12181 10 88
12182 25 107
12183 50 143
12184 100 178
12185 250 264
12186 500 305
12187 1000 332
12188 2000 370

 

  LOW AND GRADUATED CYLINDERS IN TPX®

In TPX®, transparent, low form.They have an excellent chemical resistance. Autoclavable, they can bear temperatures up to 170°C.

ART. VOL. ML H. MM
12211 10 87
12212 25 107
12213 50 143
12214 100 177
12215 250 263
12216 500 302
12217 1000 331
12218 2000 369

 

English French German Italian Portuguese Russian Spanish